What is Mod_Bandwidth

“Mod_bandwidth” (mod bandwidth) is a module for the Apache webserver that enable the setting of server-wide or per connection bandwidth limits, based on the directory, size of files and remote IP/domain.

For Apache 1.3x. ONLY! This how-to is not compatible with old versions of apache, including but not limited to 1.3beta

How to install mod_bandwidth

1. Login to your server via SSH as root.

2. Type: mkdir /root/mod_bw

3. Type: cd /root/mod_bw

4. Type: wget ftp://ftp.cohprog.com/pub/apache/module/1.3.0/mod_bandwidth.c

5. Type: /usr/local/apache/bin/apxs -c /root/mod_bw/mod_bandwidth.c -o /usr/local/apache/libexec/mod_bandwidth.so

6. Type: mkdir /usr/local/apache/bw_limit

7. Type: mkdir /usr/local/apache/bw_limit/link

8. Type: mkdir /usr/local/apache/bw_limit/master

9. Type: pico -w /etc/httpd/conf/httpd.conf

10. Locate the following Line: LoadModule rewrite_module libexec/mod_rewrite.so

11. Before the above line add this:
LoadModule bandwidth_module libexec/mod_bandwidth.so

12. Now locate this line: AddModule mod_env.c

13. Before the above line add this:
AddModule mod_bandwidth.c

14. Now locate this line: # Document types.

15. Before the above line add this:
BandWidthDataDir “/usr/local/apache/bw_limit”
BandWidthModule On

16. To enable mod_bandwidth on a virtual host locate the virtual host entry for the specified domain/acount you wish to limit. Just before the line add the following:
BandWidthModule On
BandWidth all 512

The 512 can be replaced with whatever rate you wish to limit the acount too.

17. Save the file and exit.
CTRL-X then Y then enter.

18. Type: service httpd restart

19. Type: cd /usr/sbin

20. Type: wget ftp://ftp.cohprog.com/pub/apache/module/cleanlink.pl

What is cleanlink?
Cleanlink is a deamon that is used to clean links created by mod_bandwidth when they aren’t removed properly by the server. (When a httpd process doesn’t terminate the usual way.)

21. Type: chmod 755 cleanlink.pl

22. Type: pico -w cleanlink.pl

23. Change $LINKDIR to the following:
$LINKDIR=”/usr/local/apache/bw_limit/link”;

24. Save the file and exit.
CTRL-X then Y then enter.

25. Type: perl cleanlink.pl

26. Type: pico -w /etc/rc.d/rc.local

27. Scroll down to the very end of the file and add the following:
# The following line Launches CleanLink for Mod_Bandwidth
perl /usr/sbin/cleanlink.pl

28. Save the file and exit.
CTRL-X then Y then enter.

mod_bandwidth has many options. If you wish to modify mod_bandwidth and enable more options please visit the documentation available by the programmer here: http://www.cohprog.com/v3/bandwidth/doc-en.html

Hi friends enjoy reverse ip lookup
Virtual Hosts and websites on a IP

Here are some quick tips to know all the websites and Virtual Hosts on a IP address:

1) Using whois DB
syntax: http://whois.webhosting.info/x.x.x.x
e.g.: http://whois.webhosting.info/64.233.169.99

2) Using Domain Tools (sign-up required)
syntax: http://www.domaintools.com/reverse-ip/?hostname=x.x.x.x
e.g. http://www.domaintools.com/reverse-ip/?hostname=64.233.169.99

Hope you all enjoy

Laloo Prasad

Hi first make sure you have a wifi adsl router or just router.
if u have adsl wifi router then follow these steps

1. Switch on the wireless modem.
2. Plug your phone line into your  modem
3. Connect it with cable , insert one point in adsl modem and second one in your laptop.
4. Login to your modem control panel.
5. Enable the option of Wireless, you can also set wep key over there.
6. After doing all these.
7. Then make sure internet is working with that modem.
8. Remove your cable from your laptop.
9. Now you are conected to the internet through your wifi modem

Hello friends do you know  gb(giga byte)  holds more or mb (MegaByte)

1024 kb = 1 mb

1024 mb = 1 gb

So GB holds more